Hannah Skinner Base Cabinets January 13th, 2018 - 18:32:20
Once the sub-bases for the lower cabinets are set, I recommend that you install the upper cabinets next as it is just plain easier. Once the wider base cabinets are installed it is harder to work on the narrower upper cabinets. Just measure up from the sub-base to get the top of the cabinets, add the counter thickness, add the space you want between the lower and upper cabinets (typically eighteen inches) and make a pencil mark. That is the bottom of your upper cabinets. Since your sub-base is level, just transfer the upper cabinet mark all along the run and you will have mark to set the bottom of each upper cabinet. Next locate all the wall studs and make a vertical mark using your level that will protrude both above and below the cabinets.
This way you will not be searching for a stud while standing on a ladder and balancing a cabinet. It is a few minutes work well spent. Next remove all cabinet doors marking each one is marked as to which cabinets they belong too. If you are working alone, take a piece of one by two inch furring and screw it to the wall flush with the bottom of the upper cabinet mark. You will be able to rest the cabinet on the furring while you plumb the cabinet and fasten it to the wall. Starting with the first cabinet, go ahead and screw the cabinet securely to the studs using three inch drywall screws. You can countersink them or course or use screw washers depending on what you want the final appearance to be.
Since stock cabinets are mass produced they can be quite affordable. Another advantage is speed, in most cases dealers have access to larger warehouses where the cabinets are stored, and you can have your stock cabinet order within a few short weeks or in some cases days. Custom Kitchen Cabinets Custom kitchen cabinets are cabinets that are built just for your kitchen layout, design taste and needs. Custom kitchen cabinetry can easily be built to fit between two walls or to match odd angles, something not possible with stock kitchen cabinets. There are many advantages with custom cabinets that can not be had with stock cabinetry. The advantages that are at the top of the list are selection.
If your cabinets have whats called a four inch high toe kick feature, you may have the option of cutting this four inch height down to offset a small difference in the floor heights. Be careful as cutting too much can make the cabinets look squat. If the cabinets came with a detached set of toe kicks already framed, this makes leveling a great deal easier as well. Just lay out the base cabinet supports and check to see if they are level. Some shimming or minor cutting to provide perfectly sub-bases makes the base cabinet installation a snap. You need not worry whether each cabinet is level as the bases will automatically make it so.