Hannah Skinner Base Cabinets January 13th, 2018 - 18:32:16
Semi-custom cabinetry is also mass produced by the manufacturer. You do have a bit more flexibility here. You can be specific about the size of the cabinets and choose different finishes, moldings and trim. These cabinets will be installed by the dealer. Custom cabinets are specifically designed, manufactured and installed for you. While you have a larger variety to choose from, the term custom used here is really semi-custom. A true custom cabinet is possible by hiring a skilled cabinet maker. You will have infinite variety at considerable expense.
Because of the modifications available, these cabinets are not constructed until the order has been placed. As a result, it may take longer to receive these than stock cabinets, but not as long as custom cabinets. The cost of semi-custom cabinets depends greatly on the options you desire. The consumer has a lot of control in determining the style and layout of these cabinets. When choosing cabinets, you want to make sure that you are getting a high quality product at a fair price. Shop around until you find a cabinet retailer that is knowledgeable and experienced.
Installing cabinets whether in a kitchen, laundry or utility cabinets in a garage, they all have the same basic set of installation requirements. Some simple tools are required and are in most handymans tool pails. Pencils, good carpenters four foot level, tape measure, screw gun, several Quick type C clamps and a chalk line is a great start. If you have the use of a tripod with a builders level (or can rent one for a day) this will speed the work along greatly. Starting at either end of the cabinet set, make a pencil mark four feet above the floor. Now using the four foot level, transfer that mark along the wall to the other end of the cabinet run and make another pencil mark. Measure down to the floor to see if it is four feet above the floor. If it is exactly four feet, then your floor is level. If it is more than four feet then you know the floor slopes down towards that end. If you start the cabinets at that low end you will not be able to keep the cabinets level before you run "into " the floor. If you start at the four foot end that you started with, you will be able to shim the cabinets up so they all remain the same level height above the floor.
Semi-custom cabinets are usually ½ inch plywood with ¾ inch hardwood face frame and are delivered and installed. The drawers are dovetailed of ½ inch hardwood and doors are frame and panel hardwood. Prices range from $450 to $540 per linear foot or $4,500 to $5,400 for the 10 x 10 standard. Custom cabinets offer the same ½ inch plywood with ¾ inch hardwood face frame and are delivered and installed. The drawers are dovetailed of 5/8 inch hardwood and doors are frame and panel hardwood. Prices range from $1.200 to $1,400 per linear foot or $12,000 to $14,000 for standard measurements. Armed with these definitions and what they will mean to your kitchen remodel budget, you are now ready to look for your new cabinets.