Juliet Moody Base Cabinets January 03rd, 2018 - 14:32:31
Semi-custom cabinets are usually ½ inch plywood with ¾ inch hardwood face frame and are delivered and installed. The drawers are dovetailed of ½ inch hardwood and doors are frame and panel hardwood. Prices range from $450 to $540 per linear foot or $4,500 to $5,400 for the 10 x 10 standard. Custom cabinets offer the same ½ inch plywood with ¾ inch hardwood face frame and are delivered and installed. The drawers are dovetailed of 5/8 inch hardwood and doors are frame and panel hardwood. Prices range from $1.200 to $1,400 per linear foot or $12,000 to $14,000 for standard measurements. Armed with these definitions and what they will mean to your kitchen remodel budget, you are now ready to look for your new cabinets.
Once the sub-bases for the lower cabinets are set, I recommend that you install the upper cabinets next as it is just plain easier. Once the wider base cabinets are installed it is harder to work on the narrower upper cabinets. Just measure up from the sub-base to get the top of the cabinets, add the counter thickness, add the space you want between the lower and upper cabinets (typically eighteen inches) and make a pencil mark. That is the bottom of your upper cabinets. Since your sub-base is level, just transfer the upper cabinet mark all along the run and you will have mark to set the bottom of each upper cabinet. Next locate all the wall studs and make a vertical mark using your level that will protrude both above and below the cabinets.
Stock, or store cabinets, are what you see if you go to a large home improvement store. Each store will typically have a very basic, unfinished cabinet line that is stocked in store and ready to purchase and take home that day. These are usually your cheapest option, but selections are very limited. Most of the time these will need to be finished either by you or by a contractor. Dont expect anything spectacular, these are usually cabinets in their most basic form. Drawer fronts are typically made from glued up strips of wood instead of one single piece of wood. Doors are usually paneled doors instead of raised wood panel doors. The carcasses of the cabinets will typically be cut from particle board, and if there is a back panel it is usually 1/8" hard-board. Countertop fastening brackets will be small, plastic corner brackets with a single screw hole for attaching to the counter.
However, if you are careful, purchasing cabinets online can be a smart budget move. You can purchase budget-friendly pre-made or stock kitchen cabinets that you repaint or finish yourself. Most times, you will have to install them yourself, so be prepared. Then again, your tastes may involve buying or designing custom cabinets online. You may require a special height, or you just want a unique look. You might want circular cabinets or some other shape! Some kitchen cabinet designs have glass inlays or fronts; those are usually always semi-custom or custom made. Other "bonus" perks that you may wish to install in your cabinets are pull out butcher blocks, rotating shelves, or pockets or spice racks on the inside of the cabinet doors themselves.