Hannah Skinner Base Cabinets October 14th, 2017 - 08:47:27
Stock, or store cabinets, are what you see if you go to a large home improvement store. Each store will typically have a very basic, unfinished cabinet line that is stocked in store and ready to purchase and take home that day. These are usually your cheapest option, but selections are very limited. Most of the time these will need to be finished either by you or by a contractor. Dont expect anything spectacular, these are usually cabinets in their most basic form. Drawer fronts are typically made from glued up strips of wood instead of one single piece of wood. Doors are usually paneled doors instead of raised wood panel doors. The carcasses of the cabinets will typically be cut from particle board, and if there is a back panel it is usually 1/8" hard-board. Countertop fastening brackets will be small, plastic corner brackets with a single screw hole for attaching to the counter.
In straight-run base-cabinets, one consideration that should be a priority is, if at all possible, to include "roll-outs" (variably called roll-out shelves, trays, etc.) factory-installed inside them; this is because "roll-outs" provide much better accessibility to items stored there (but, if your budget will only allow one roll-out per cabinet, be sure to place it on the cabinets bottom level). But, in case you happen to not be replacing perfectly fine base cabinets which do not have "roll-outs", all is not lost; that advantage can be added later via "inserts". And, if you are then unable to find "inserts" from a manufacturer, they can be self-built and installed.
What is your choice? For those who like to add a touch of tradition to their bathrooms cabinet towers made of wood with carvings and designs are available. The accurate carvings used in such cabinets offer a royal look. Short cabinets that can be accommodated either below the sinks or the wash basins consume the least space. Though the ideal cabinet for any bathroom would be the narrow, long ones which can be placed either in the corners or mounted, the smaller ones fit to the size of the room and the budget too. The wooden cabinets are usually coated with special varnish that can withstand the wet and humid conditions of the bathroom and infestation of insects and bugs.
Since a custom cabinet maker will be producing your new kitchen cabinets you can have them make just about any style that is imaginable. You can also have them produce cabinets that are in rare or exotic woods. You can also have a much larger selection of cabinet doors and drawer fronts. Some custom cabinet makers do opt to outsource their doors and drawer fronts, in this case they will usually have a very large catalog of doors for you to make your selection. With custom built cabinets you can select the type of hardware such as cabinet door hinges as well as drawer slides. Most are currently opting for hinges and drawer slides with the soft close feature. This is not only very popular but I wouldnt be surprise if this becomes the standard in the next few years.