Adeline Hull Base Cabinets December 18th, 2017 - 11:13:32
Place two C clamps in the first cabinet, lift the second cabinet into place and using the C clamps, firmly clamp the front face stile of the first cabinet to the second. The combination of the wall furring strip and the two clamps will allow you to let go and do the work of affixing the second cabinet to the wall and to each other. Making sure that the front faces are perfectly flush with each other and the heights are perfectly matched, standard practice is to pre-drill a screw hole behind the door hinge. Using drywall screws again, insert a screw in the hole making sure the screw will not penetrate through the stile of the other cabinet (too long). Place one screw behind each hinge. Now fasten the second cabinet to the wall and then release the clamps. This same scenario repeats itself until you reach the end of the cabinets. You may have spaces where a window occurs but your furring strip will assure that both sections are mounted at the same height.
Because custom cabinets are made from scratch, you will need to allow plenty of time for them to be created and installed. Homeowners who want their cabinets replaced quickly should make a different choice. Also, these cabinets are generally more expensive than other options. The high quality and customization of this cabinetry can make them much more expensive than other stock or semi-custom cabinets. Stock Cabinets: The biggest advantage of stock cabinets is that they are readily available for installation. Many home improvement stores and big box retailers sell stock cabinets that can be picked up or delivered within a week or two. Manufacturers of these cabinets offer a variety of styles and colors that will match your home décor and compliment your style. Homeowners like these cabinets because they are very affordable and easy to find.
Have you been shopping for kitchen cabinetry and been dissatisfied with the selection of the big box stores and import cabinet dealers? Well perhaps you should really take a close look at considering custom built kitchen cabinets as an option for your kitchen remodel project. Here I will discuss some of the advantages and disadvantages of both stock and custom cabinetry. Stock Kitchen Cabinetry What are stock kitchen cabinetry? Stock kitchen cabinets are cabinetry that are pre-built to a specific size and then resold by a cabinetry dealer. Stock cabinets are typically produced in 2 inch increments. In some basic kitchen layouts such as an L shaped kitchen you can lay cabinets out without much problem.
With the upper cabinets mounted go ahead and install the base cabinets in the exact same way. Each cabinet screwed side to side and then to the wall. Once all cabinets have been installed, go ahead and install your counter tops. Back splash work, electrical connections for micro waves or exhaust hoods and their actual installations should all be done before the doors are re-installed. You want to handle the doors gently as they are the major amount of what people actually see. Level the doors, install the drawer and door pulls and your done. Almost all municipalities require a building permit for this type of work as in a kitchen it involves plumbing, electrical, perhaps heating and possible structural changes as well. A garage set of work storage cabinets may not involve any of these items but be safe and ask first.