Lauri Frank Base Cabinets January 16th, 2018 - 10:31:09
Since a custom cabinet maker will be producing your new kitchen cabinets you can have them make just about any style that is imaginable. You can also have them produce cabinets that are in rare or exotic woods. You can also have a much larger selection of cabinet doors and drawer fronts. Some custom cabinet makers do opt to outsource their doors and drawer fronts, in this case they will usually have a very large catalog of doors for you to make your selection. With custom built cabinets you can select the type of hardware such as cabinet door hinges as well as drawer slides. Most are currently opting for hinges and drawer slides with the soft close feature. This is not only very popular but I wouldnt be surprise if this becomes the standard in the next few years.
Whenever you need to make a major purchase if you are budget-conscious -- by choice or by necessity, the best (I would say, only) place to start is by accumulating as much information as you can about the available possibilities. When buying cabinets, an extremely important consideration is to be sure that the measurements you are working with of the involved area(s) are accurate. You certainly do not want to learn too late that your cabinet choices and/or the resulting layout of them might have better met your needs.
In planning your kitchen remodeling, the kitchen cabinets will give immediate eye appeal, provide functionality but can also be the biggest cost. Regardless of what your remodel budget is, the cabinet could easily be one half of that expense. As we wander through the cabinet section of the store, it does seem these are just big boxes with doors. Nevertheless we are amazed at the cost. Making cabinets does require skill to have tightly fitted corners and joins. If one part is off, some other part wont fit properly. The type of wood used and the finish on the wood all have a price tag. Nevertheless, you need to get the best cabinets possible for your budget. Here are some ideas on what you can find.
Place two C clamps in the first cabinet, lift the second cabinet into place and using the C clamps, firmly clamp the front face stile of the first cabinet to the second. The combination of the wall furring strip and the two clamps will allow you to let go and do the work of affixing the second cabinet to the wall and to each other. Making sure that the front faces are perfectly flush with each other and the heights are perfectly matched, standard practice is to pre-drill a screw hole behind the door hinge. Using drywall screws again, insert a screw in the hole making sure the screw will not penetrate through the stile of the other cabinet (too long). Place one screw behind each hinge. Now fasten the second cabinet to the wall and then release the clamps. This same scenario repeats itself until you reach the end of the cabinets. You may have spaces where a window occurs but your furring strip will assure that both sections are mounted at the same height.