Lauri Frank Base Cabinets January 08th, 2018 - 10:25:42
On the other hand if your kitchen is country style then you might want to use traditional style cabinets. Apart from this, choosing between the custom cabinets and stock cabinets is the most difficult thing to do as it involves a lot of mind trouble. This choice can be made by keeping in mind your budget, the kitchen environment and your taste. While making the decision you should keep all the flaws and advantages in mind so that you wont end up making the wrong choice. Stock Cabinets Some people think that stock cabinets are the cabinets that can be taken away from the retailer quite easily but this is not the fact. Even though the cabinets that you can see on the store shelves are selected by you but you have to first place the order at the shop management and then wait for your required design of cabinets to be ready.
Varieties of Bathroom Linen Cabinets These cabinets are available in various designs and sizes to fit your bathrooms. For those who wish to give their bathrooms a modern look, smaller cabinets with more space is available and for those who prefer traditional lifestyle and choose not to make the place look stuffy antique style cabinets are available. You can store more than just linens with proper cabinets that are functional. There are a few linen cabinets that could fit in narrow places such as hallway and passages leading to the bathrooms with no extra space.
Installing cabinets whether in a kitchen, laundry or utility cabinets in a garage, they all have the same basic set of installation requirements. Some simple tools are required and are in most handymans tool pails. Pencils, good carpenters four foot level, tape measure, screw gun, several Quick type C clamps and a chalk line is a great start. If you have the use of a tripod with a builders level (or can rent one for a day) this will speed the work along greatly. Starting at either end of the cabinet set, make a pencil mark four feet above the floor. Now using the four foot level, transfer that mark along the wall to the other end of the cabinet run and make another pencil mark. Measure down to the floor to see if it is four feet above the floor. If it is exactly four feet, then your floor is level. If it is more than four feet then you know the floor slopes down towards that end. If you start the cabinets at that low end you will not be able to keep the cabinets level before you run "into " the floor. If you start at the four foot end that you started with, you will be able to shim the cabinets up so they all remain the same level height above the floor.
Once the sub-bases for the lower cabinets are set, I recommend that you install the upper cabinets next as it is just plain easier. Once the wider base cabinets are installed it is harder to work on the narrower upper cabinets. Just measure up from the sub-base to get the top of the cabinets, add the counter thickness, add the space you want between the lower and upper cabinets (typically eighteen inches) and make a pencil mark. That is the bottom of your upper cabinets. Since your sub-base is level, just transfer the upper cabinet mark all along the run and you will have mark to set the bottom of each upper cabinet. Next locate all the wall studs and make a vertical mark using your level that will protrude both above and below the cabinets.