Deanne Fields Base Cabinets January 09th, 2018 - 10:10:05
Place two C clamps in the first cabinet, lift the second cabinet into place and using the C clamps, firmly clamp the front face stile of the first cabinet to the second. The combination of the wall furring strip and the two clamps will allow you to let go and do the work of affixing the second cabinet to the wall and to each other. Making sure that the front faces are perfectly flush with each other and the heights are perfectly matched, standard practice is to pre-drill a screw hole behind the door hinge. Using drywall screws again, insert a screw in the hole making sure the screw will not penetrate through the stile of the other cabinet (too long). Place one screw behind each hinge. Now fasten the second cabinet to the wall and then release the clamps. This same scenario repeats itself until you reach the end of the cabinets. You may have spaces where a window occurs but your furring strip will assure that both sections are mounted at the same height.
These cabinets are a one-size-fits-all solution to your kitchen storage needs. If you have an irregular room or need modifications, these cabinets may not be the best choice for you. Typically, stock cabinets are made from lower quality materials and will not last as long as custom cabinetry. Semi-Custom Cabinets: These cabinets are a good compromise between custom and stock cabinetry. Semi-custom cabinets are stock cabinets that a consumer can modify to meet his or her individual needs. There are a variety of size and style options available that let the homeowner create a kitchen layout that caters to his or her tastes and lifestyle. With so many options and modifications available, the consumer can create the kitchen of his dreams that is unique and personalized for his family.
Purchasing Cabinets There are different tiers on purchasing cabinets too. You save money by assembling pre-cut parts from the manufacturer. Since cabinets will be the focal point of your kitchen, you may prefer to have assembled cabinets that are installed by the dealer. The following descriptions will help you make this decision. RTA or Ready-to-Assemble is provided by the cabinet manufacturer. If the manufacturer doesnt incur the labor expense to assemble the cabinet, he will pass this savings on to you. If you are going to use RTA cabinets to cut down on the expenses, you need to find your cabinets at the beginning of your project. You need time to assemble them and ready to install after installing the flooring, painting, papering are complete.
Semi-custom cabinets are usually ½ inch plywood with ¾ inch hardwood face frame and are delivered and installed. The drawers are dovetailed of ½ inch hardwood and doors are frame and panel hardwood. Prices range from $450 to $540 per linear foot or $4,500 to $5,400 for the 10 x 10 standard. Custom cabinets offer the same ½ inch plywood with ¾ inch hardwood face frame and are delivered and installed. The drawers are dovetailed of 5/8 inch hardwood and doors are frame and panel hardwood. Prices range from $1.200 to $1,400 per linear foot or $12,000 to $14,000 for standard measurements. Armed with these definitions and what they will mean to your kitchen remodel budget, you are now ready to look for your new cabinets.