Grace Holcomb Base Cabinets January 07th, 2018 - 12:15:34
Custom Cabinet Cost Most people want to know how much more custom cabinetry will cost as compared to stock cabinets. This is almost impossible to answer with any degree of accuracy. The real truth of the matter is that custom cabinets are going to cost more that the lower lines of comparable stock cabinetry. But we have seen custom cabinets be very competitive with the mid to higher range stock cabinets. Despite the higher prices of custom kitchen cabinets it is almost always worth the extra cost. The cabinets are built in a much more solid fashion as well as most custom cabinetmakers will use a ¾ inch thick cabinet case material, it doesnt get much more solid than that. All cabinet shops will have varying prices, so we do recommend you always compare the same exact kitchen design from shop to shop for the most accurate estimations.
Each and every thing about the cabinets starting from designs of the cabinets to the material and finishing that should be used in manufacturing; all is decided by the person who wants the custom based design. Measurements of these cabinets are open ended so that you can decide the design and the lengths and widths of the cabinets according to the length of the wall. The material required for custom made cabinets can be the same as for the stock cabinets but you can also choose lead time that lasts longer than the material used for stock cabinets. Solid wood is preferred to make these cabinets. There are some advantages and disadvantages of both. The stock cabinets are available immediately and their variety is vast too but they have limited sizes and they last for a small time. On the other hand, the custom cabinets are available in free sizes as required by the user. The only problem is that the custom cabinets are a lot expensive than the stock cabinets.
Installing cabinets whether in a kitchen, laundry or utility cabinets in a garage, they all have the same basic set of installation requirements. Some simple tools are required and are in most handymans tool pails. Pencils, good carpenters four foot level, tape measure, screw gun, several Quick type C clamps and a chalk line is a great start. If you have the use of a tripod with a builders level (or can rent one for a day) this will speed the work along greatly. Starting at either end of the cabinet set, make a pencil mark four feet above the floor. Now using the four foot level, transfer that mark along the wall to the other end of the cabinet run and make another pencil mark. Measure down to the floor to see if it is four feet above the floor. If it is exactly four feet, then your floor is level. If it is more than four feet then you know the floor slopes down towards that end. If you start the cabinets at that low end you will not be able to keep the cabinets level before you run "into " the floor. If you start at the four foot end that you started with, you will be able to shim the cabinets up so they all remain the same level height above the floor.
Since a custom cabinet maker will be producing your new kitchen cabinets you can have them make just about any style that is imaginable. You can also have them produce cabinets that are in rare or exotic woods. You can also have a much larger selection of cabinet doors and drawer fronts. Some custom cabinet makers do opt to outsource their doors and drawer fronts, in this case they will usually have a very large catalog of doors for you to make your selection. With custom built cabinets you can select the type of hardware such as cabinet door hinges as well as drawer slides. Most are currently opting for hinges and drawer slides with the soft close feature. This is not only very popular but I wouldnt be surprise if this becomes the standard in the next few years.