Robbie Greene Base Cabinets January 03rd, 2018 - 14:33:19
In straight-run base-cabinets, one consideration that should be a priority is, if at all possible, to include "roll-outs" (variably called roll-out shelves, trays, etc.) factory-installed inside them; this is because "roll-outs" provide much better accessibility to items stored there (but, if your budget will only allow one roll-out per cabinet, be sure to place it on the cabinets bottom level). But, in case you happen to not be replacing perfectly fine base cabinets which do not have "roll-outs", all is not lost; that advantage can be added later via "inserts". And, if you are then unable to find "inserts" from a manufacturer, they can be self-built and installed.
Beginning with base corner cabinets, we have: (1) the symmetrical easy reach -- this cabinet is the same length on each side of the corner and contains either shelves along its rear walls or a carousel with shelves "pie-cut" to accommodate the doors (a center hinge allows opening either the first door or both); (2) the asymmetircal easy reach -- this cabinet is a little shorter on one leg (if it includes a carousel, that diameter will be the length of the cabinets shorter leg); (3) the revolving -- this cabinet is like cabinet #1 but its doors revolve with the carousel shelves; (4) the diagonal-front -- this cabinet allows a full-circle carousel; and (5) the blind -- this cabinet looks like a straight-run cabinet but it extends into the corner along the side of an adjoining cabinet, structure, or appliance thus making its "buried" shelves accessible only from the front door (to allow better use of the "blind" corner cabinet, some manufacturers have cleverly created a cabinet with a first section which, on opening the door, pulls out and pivots to the side to expose roll-out trays which can then move forward to present their contents). Finally, there is a sink base corner cabinet that can be either an "L-shaped" cabinet to hold a butterfly sink or a diagonal-front cabinet with a regular straight-line sink -- a caveat whenever a corner sink cabinet is used: be sure that adequate standing area (for loading and unloading the dishwasher) is created by placing a 12-inch wide regular cabinet between the dishwasher and the corner cabinets side.
Because of the modifications available, these cabinets are not constructed until the order has been placed. As a result, it may take longer to receive these than stock cabinets, but not as long as custom cabinets. The cost of semi-custom cabinets depends greatly on the options you desire. The consumer has a lot of control in determining the style and layout of these cabinets. When choosing cabinets, you want to make sure that you are getting a high quality product at a fair price. Shop around until you find a cabinet retailer that is knowledgeable and experienced.
What is your choice? For those who like to add a touch of tradition to their bathrooms cabinet towers made of wood with carvings and designs are available. The accurate carvings used in such cabinets offer a royal look. Short cabinets that can be accommodated either below the sinks or the wash basins consume the least space. Though the ideal cabinet for any bathroom would be the narrow, long ones which can be placed either in the corners or mounted, the smaller ones fit to the size of the room and the budget too. The wooden cabinets are usually coated with special varnish that can withstand the wet and humid conditions of the bathroom and infestation of insects and bugs.