Angelica Hancock Base Cabinets January 04th, 2018 - 15:57:29
In straight-run base-cabinets, one consideration that should be a priority is, if at all possible, to include "roll-outs" (variably called roll-out shelves, trays, etc.) factory-installed inside them; this is because "roll-outs" provide much better accessibility to items stored there (but, if your budget will only allow one roll-out per cabinet, be sure to place it on the cabinets bottom level). But, in case you happen to not be replacing perfectly fine base cabinets which do not have "roll-outs", all is not lost; that advantage can be added later via "inserts". And, if you are then unable to find "inserts" from a manufacturer, they can be self-built and installed.
However, if you are careful, purchasing cabinets online can be a smart budget move. You can purchase budget-friendly pre-made or stock kitchen cabinets that you repaint or finish yourself. Most times, you will have to install them yourself, so be prepared. Then again, your tastes may involve buying or designing custom cabinets online. You may require a special height, or you just want a unique look. You might want circular cabinets or some other shape! Some kitchen cabinet designs have glass inlays or fronts; those are usually always semi-custom or custom made. Other "bonus" perks that you may wish to install in your cabinets are pull out butcher blocks, rotating shelves, or pockets or spice racks on the inside of the cabinet doors themselves.
But what do you do when you are fitting cabinets between two walls? Well in this case the cabinet dealer can supply you with filler pieces to take up any large gaps that will eventually occur by using cabinets that are built within 2 inch increments. These cabinet filler pieces can be cut to fit the remaining gap relatively well. The main disadvantage with stock kitchen cabinets is the aforementioned incremental sizing but also the quality. Although as with anything the lower to mid range priced stock cabinets are typically made from thinner materials and have economy hardware such as cabinet door hinges and drawer slides. There are a few advantages with using stock cabinetry the very first one that comes to mind is cost.
Since a custom cabinet maker will be producing your new kitchen cabinets you can have them make just about any style that is imaginable. You can also have them produce cabinets that are in rare or exotic woods. You can also have a much larger selection of cabinet doors and drawer fronts. Some custom cabinet makers do opt to outsource their doors and drawer fronts, in this case they will usually have a very large catalog of doors for you to make your selection. With custom built cabinets you can select the type of hardware such as cabinet door hinges as well as drawer slides. Most are currently opting for hinges and drawer slides with the soft close feature. This is not only very popular but I wouldnt be surprise if this becomes the standard in the next few years.