Leonor Jordan Base Cabinets January 11th, 2018 - 10:53:50
For cabinet backs you will typically see 1/2" thick material, with thicker areas specifically manufactured for mounting screws. The tops will always incorporate a countertop fastening strip at the front and rear of base cabinets, which you wont see in stock cabinets. As far as design and aesthetics go, the only limitations are your imagination and budget. Almost anything is possible because your cabinets will be made specifically just for you. You have complete access to options such as pull-out slides, trash organizers, limitless hardware choices, pantry organizers, and much more. The cabinetmaker will often install these cabinets themselves too, saving you the headache of doing it yourself. While obviously more expensive, you can design and get exactly what you want, instead of settling for what you can find.
In planning your kitchen remodeling, the kitchen cabinets will give immediate eye appeal, provide functionality but can also be the biggest cost. Regardless of what your remodel budget is, the cabinet could easily be one half of that expense. As we wander through the cabinet section of the store, it does seem these are just big boxes with doors. Nevertheless we are amazed at the cost. Making cabinets does require skill to have tightly fitted corners and joins. If one part is off, some other part wont fit properly. The type of wood used and the finish on the wood all have a price tag. Nevertheless, you need to get the best cabinets possible for your budget. Here are some ideas on what you can find.
Place two C clamps in the first cabinet, lift the second cabinet into place and using the C clamps, firmly clamp the front face stile of the first cabinet to the second. The combination of the wall furring strip and the two clamps will allow you to let go and do the work of affixing the second cabinet to the wall and to each other. Making sure that the front faces are perfectly flush with each other and the heights are perfectly matched, standard practice is to pre-drill a screw hole behind the door hinge. Using drywall screws again, insert a screw in the hole making sure the screw will not penetrate through the stile of the other cabinet (too long). Place one screw behind each hinge. Now fasten the second cabinet to the wall and then release the clamps. This same scenario repeats itself until you reach the end of the cabinets. You may have spaces where a window occurs but your furring strip will assure that both sections are mounted at the same height.
Semi-custom cabinetry is also mass produced by the manufacturer. You do have a bit more flexibility here. You can be specific about the size of the cabinets and choose different finishes, moldings and trim. These cabinets will be installed by the dealer. Custom cabinets are specifically designed, manufactured and installed for you. While you have a larger variety to choose from, the term custom used here is really semi-custom. A true custom cabinet is possible by hiring a skilled cabinet maker. You will have infinite variety at considerable expense.