Adeline Hull Base Cabinets January 16th, 2018 - 10:30:33
The Basics Before you shop for cabinets, it is a good idea to determine what type of cabinet you need and get familiar with the terminology used by the salesman. MDF is a medium density fiber board cabinet. Base Cabinets are the bottom part of the cabinets that sit on the floor. These project your overall kitchen layout. Wall Cabinets hang on the wall just above the Base Cabinets. But your design will likely have some Base Cabinets with nothing to hang above. An example would be the sink area. Framed Cabinets provide a traditional look as the cabinet does have a frame around the outside of the box and around each door.
This way you will not be searching for a stud while standing on a ladder and balancing a cabinet. It is a few minutes work well spent. Next remove all cabinet doors marking each one is marked as to which cabinets they belong too. If you are working alone, take a piece of one by two inch furring and screw it to the wall flush with the bottom of the upper cabinet mark. You will be able to rest the cabinet on the furring while you plumb the cabinet and fasten it to the wall. Starting with the first cabinet, go ahead and screw the cabinet securely to the studs using three inch drywall screws. You can countersink them or course or use screw washers depending on what you want the final appearance to be.
Because custom cabinets are made from scratch, you will need to allow plenty of time for them to be created and installed. Homeowners who want their cabinets replaced quickly should make a different choice. Also, these cabinets are generally more expensive than other options. The high quality and customization of this cabinetry can make them much more expensive than other stock or semi-custom cabinets. Stock Cabinets: The biggest advantage of stock cabinets is that they are readily available for installation. Many home improvement stores and big box retailers sell stock cabinets that can be picked up or delivered within a week or two. Manufacturers of these cabinets offer a variety of styles and colors that will match your home décor and compliment your style. Homeowners like these cabinets because they are very affordable and easy to find.
Typically, stocked cabinets are offered in extremely limited sizes, and while most cabinets are offered in 3" increments, some stock cabinets may only be available in 6" increments. This is important when it comes to the overall layout of your kitchen remodel, because stock cabinets are mass-produced to the same size and specifications with no regards as to where they go. You will usually need fillers and end panels to create a finished look when using stock cabinets. The end of each cabinet that is exposed, on both the upper and the base cabinets, will need to be finished to match the front of the cabinets. This will include cutting and fitting finished panels onto the cabinet carcass itself. Keep in mind that if you are running your cabinets wall to wall, then finishing the ends is not important since the wall will hide the ends.