Mari Ferguson Base Cabinets January 08th, 2018 - 10:26:25
Stock, or store cabinets, are what you see if you go to a large home improvement store. Each store will typically have a very basic, unfinished cabinet line that is stocked in store and ready to purchase and take home that day. These are usually your cheapest option, but selections are very limited. Most of the time these will need to be finished either by you or by a contractor. Dont expect anything spectacular, these are usually cabinets in their most basic form. Drawer fronts are typically made from glued up strips of wood instead of one single piece of wood. Doors are usually paneled doors instead of raised wood panel doors. The carcasses of the cabinets will typically be cut from particle board, and if there is a back panel it is usually 1/8" hard-board. Countertop fastening brackets will be small, plastic corner brackets with a single screw hole for attaching to the counter.
Beginning with base corner cabinets, we have: (1) the symmetrical easy reach -- this cabinet is the same length on each side of the corner and contains either shelves along its rear walls or a carousel with shelves "pie-cut" to accommodate the doors (a center hinge allows opening either the first door or both); (2) the asymmetircal easy reach -- this cabinet is a little shorter on one leg (if it includes a carousel, that diameter will be the length of the cabinets shorter leg); (3) the revolving -- this cabinet is like cabinet #1 but its doors revolve with the carousel shelves; (4) the diagonal-front -- this cabinet allows a full-circle carousel; and (5) the blind -- this cabinet looks like a straight-run cabinet but it extends into the corner along the side of an adjoining cabinet, structure, or appliance thus making its "buried" shelves accessible only from the front door (to allow better use of the "blind" corner cabinet, some manufacturers have cleverly created a cabinet with a first section which, on opening the door, pulls out and pivots to the side to expose roll-out trays which can then move forward to present their contents). Finally, there is a sink base corner cabinet that can be either an "L-shaped" cabinet to hold a butterfly sink or a diagonal-front cabinet with a regular straight-line sink -- a caveat whenever a corner sink cabinet is used: be sure that adequate standing area (for loading and unloading the dishwasher) is created by placing a 12-inch wide regular cabinet between the dishwasher and the corner cabinets side.
Stock cabinets are already manufactured as for samples for the customers in standard sizes so that they get an idea about what designs are available and how the stock cabinets look. If we speak about the thickness of the stock cabinets, they are nine inches wide. Height of these cabinets is about thirty to thirty-three inches. These cabinets are built as samples for the customers to have an idea about the stock variety available at the shop. For the manufacturing of these cabinets, plywood and melamine is used. Each part of the cabinet is made accurately and efficiently and when all the pieces are built then they are finally joined together to form a full fledge cabinet. Custom Cabinets Now comes the turn of the custom kitchen cabinets. These cabinets are made according to the customers specifications and requirements.
Semi-custom cabinets are usually ½ inch plywood with ¾ inch hardwood face frame and are delivered and installed. The drawers are dovetailed of ½ inch hardwood and doors are frame and panel hardwood. Prices range from $450 to $540 per linear foot or $4,500 to $5,400 for the 10 x 10 standard. Custom cabinets offer the same ½ inch plywood with ¾ inch hardwood face frame and are delivered and installed. The drawers are dovetailed of 5/8 inch hardwood and doors are frame and panel hardwood. Prices range from $1.200 to $1,400 per linear foot or $12,000 to $14,000 for standard measurements. Armed with these definitions and what they will mean to your kitchen remodel budget, you are now ready to look for your new cabinets.