Florence Rich Base Cabinets October 24th, 2017 - 09:23:56
If you are remodeling your kitchen (or building anew), you may need to choose a corner cabinet although not all kitchens need them.For example, a "galley" kitchen is called that because the walls (holding cabinets and appliances) that make up the kitchen face each other and, therefore, preclude the need for corner cabinets. Another possible arrangement in this vein would be an "L-shaped" kitchen with a straight-run of cabinets along one wall and another straight-run of cabinets on a wall that is perpendicular to it but separated from it by a doorway or floor-to-ceiling window. Cabinets installed in a straight run do not pose the variety of choices that corner cabinets do; therefore, if your new kitchen, bathroom, or office needs a corner cabinet, having a list of the types of corner cabinets currently available should help you make an educated choice in their shape and size.
Cost Each type of cabinet has a general budget that you can expect. Below are more details on each type and the expected price range for 10 x 10 standard cabinets. RTA cabinets are the least expensive. The frameless box and doors will be ¾ inch melamine and the drawers will have metal sides. Since you will be doing the installation, the cost of these is very low at approximately $70.00 per linear foot or $700.00 for your 10 x 10 standard. Stock cabinets have a major price increase with improved materials and they will be delivered and installed. The wood is generally ¾ inch hard board face frame and ½ inch particle board sides with hard board framed doors. Since you have a few more choices on finishes or stains, the price can range from $360 to $432 per linear foot or $3,600 to $4,320 for the standard measurements.
In planning your kitchen remodeling, the kitchen cabinets will give immediate eye appeal, provide functionality but can also be the biggest cost. Regardless of what your remodel budget is, the cabinet could easily be one half of that expense. As we wander through the cabinet section of the store, it does seem these are just big boxes with doors. Nevertheless we are amazed at the cost. Making cabinets does require skill to have tightly fitted corners and joins. If one part is off, some other part wont fit properly. The type of wood used and the finish on the wood all have a price tag. Nevertheless, you need to get the best cabinets possible for your budget. Here are some ideas on what you can find.
In straight-run base-cabinets, one consideration that should be a priority is, if at all possible, to include "roll-outs" (variably called roll-out shelves, trays, etc.) factory-installed inside them; this is because "roll-outs" provide much better accessibility to items stored there (but, if your budget will only allow one roll-out per cabinet, be sure to place it on the cabinets bottom level). But, in case you happen to not be replacing perfectly fine base cabinets which do not have "roll-outs", all is not lost; that advantage can be added later via "inserts". And, if you are then unable to find "inserts" from a manufacturer, they can be self-built and installed.