Florence Rich Base Cabinets January 13th, 2018 - 18:32:52
Place two C clamps in the first cabinet, lift the second cabinet into place and using the C clamps, firmly clamp the front face stile of the first cabinet to the second. The combination of the wall furring strip and the two clamps will allow you to let go and do the work of affixing the second cabinet to the wall and to each other. Making sure that the front faces are perfectly flush with each other and the heights are perfectly matched, standard practice is to pre-drill a screw hole behind the door hinge. Using drywall screws again, insert a screw in the hole making sure the screw will not penetrate through the stile of the other cabinet (too long). Place one screw behind each hinge. Now fasten the second cabinet to the wall and then release the clamps. This same scenario repeats itself until you reach the end of the cabinets. You may have spaces where a window occurs but your furring strip will assure that both sections are mounted at the same height.
Secondly selection of the cabinets depends upon what you wish to store. If you do not intend to store too much of linen, opt for the towel racks style which can be rotated. Whatever the style be the materials used to make these cabinets are durable and can withstand the rough conditions of any bathroom. You get to choose from a wide option of metal, steel, glass and wood for a touch of modernism, but just be assured that they are rust free. The doors of the cabinet are one of the most important aspects to consider when buying a cabinet for your bathroom. Free standing ones have an option of opaque wood and glass doors. While the glass doors suit accessories like perfumes, lotions, creams and other antique items used in the bath, things like bath towels, linens, kids toys and wash clothes look better stored in cabinets with wooden doors.
Installing cabinets whether in a kitchen, laundry or utility cabinets in a garage, they all have the same basic set of installation requirements. Some simple tools are required and are in most handymans tool pails. Pencils, good carpenters four foot level, tape measure, screw gun, several Quick type C clamps and a chalk line is a great start. If you have the use of a tripod with a builders level (or can rent one for a day) this will speed the work along greatly. Starting at either end of the cabinet set, make a pencil mark four feet above the floor. Now using the four foot level, transfer that mark along the wall to the other end of the cabinet run and make another pencil mark. Measure down to the floor to see if it is four feet above the floor. If it is exactly four feet, then your floor is level. If it is more than four feet then you know the floor slopes down towards that end. If you start the cabinets at that low end you will not be able to keep the cabinets level before you run "into " the floor. If you start at the four foot end that you started with, you will be able to shim the cabinets up so they all remain the same level height above the floor.
Custom Cabinets: Custom cabinets allow homeowners to fully customize the size, shape, design, hardware, and any special features that you would like your cabinets to have. These cabinets can be created to fit into any kitchen, no matter the shape or size. This makes them an ideal choice for rooms that have an irregular shape, unusual storage needs, or specific design requirements. Most cabinetry professionals use high quality materials and construct their cabinets with the utmost care and concern. Better materials and craftsmanship means that your cabinets will add value to your home and will withstand many years of use.