Nina Ford Base Cabinets January 05th, 2018 - 10:36:04
Each and every thing about the cabinets starting from designs of the cabinets to the material and finishing that should be used in manufacturing; all is decided by the person who wants the custom based design. Measurements of these cabinets are open ended so that you can decide the design and the lengths and widths of the cabinets according to the length of the wall. The material required for custom made cabinets can be the same as for the stock cabinets but you can also choose lead time that lasts longer than the material used for stock cabinets. Solid wood is preferred to make these cabinets. There are some advantages and disadvantages of both. The stock cabinets are available immediately and their variety is vast too but they have limited sizes and they last for a small time. On the other hand, the custom cabinets are available in free sizes as required by the user. The only problem is that the custom cabinets are a lot expensive than the stock cabinets.
Find a room in your house or the basement to assemble them. Make sure that once these cabinets are assembled that you can still get them through the door and back into the kitchen. When they are assembled, they are going to be big, bulky items to move around. Youre going to need several people to move them too. Stock Cabinets or Factory-Assembled RTA has been fully assembled by the factory and are shipped to the dealer. These are a quick assembly process. If you dont have time or talent for assembling things, or dont have an assembly area, this may be best. The dealer will provide a crew or arrange for their installation.
Since stock cabinets are mass produced they can be quite affordable. Another advantage is speed, in most cases dealers have access to larger warehouses where the cabinets are stored, and you can have your stock cabinet order within a few short weeks or in some cases days. Custom Kitchen Cabinets Custom kitchen cabinets are cabinets that are built just for your kitchen layout, design taste and needs. Custom kitchen cabinetry can easily be built to fit between two walls or to match odd angles, something not possible with stock kitchen cabinets. There are many advantages with custom cabinets that can not be had with stock cabinetry. The advantages that are at the top of the list are selection.
Semi-custom cabinets are usually ½ inch plywood with ¾ inch hardwood face frame and are delivered and installed. The drawers are dovetailed of ½ inch hardwood and doors are frame and panel hardwood. Prices range from $450 to $540 per linear foot or $4,500 to $5,400 for the 10 x 10 standard. Custom cabinets offer the same ½ inch plywood with ¾ inch hardwood face frame and are delivered and installed. The drawers are dovetailed of 5/8 inch hardwood and doors are frame and panel hardwood. Prices range from $1.200 to $1,400 per linear foot or $12,000 to $14,000 for standard measurements. Armed with these definitions and what they will mean to your kitchen remodel budget, you are now ready to look for your new cabinets.