Gladys Avery Base Cabinets January 03rd, 2018 - 14:33:33
If you are remodeling your kitchen (or building anew), you may need to choose a corner cabinet although not all kitchens need them.For example, a "galley" kitchen is called that because the walls (holding cabinets and appliances) that make up the kitchen face each other and, therefore, preclude the need for corner cabinets. Another possible arrangement in this vein would be an "L-shaped" kitchen with a straight-run of cabinets along one wall and another straight-run of cabinets on a wall that is perpendicular to it but separated from it by a doorway or floor-to-ceiling window. Cabinets installed in a straight run do not pose the variety of choices that corner cabinets do; therefore, if your new kitchen, bathroom, or office needs a corner cabinet, having a list of the types of corner cabinets currently available should help you make an educated choice in their shape and size.
Beginning with base corner cabinets, we have: (1) the symmetrical easy reach -- this cabinet is the same length on each side of the corner and contains either shelves along its rear walls or a carousel with shelves "pie-cut" to accommodate the doors (a center hinge allows opening either the first door or both); (2) the asymmetircal easy reach -- this cabinet is a little shorter on one leg (if it includes a carousel, that diameter will be the length of the cabinets shorter leg); (3) the revolving -- this cabinet is like cabinet #1 but its doors revolve with the carousel shelves; (4) the diagonal-front -- this cabinet allows a full-circle carousel; and (5) the blind -- this cabinet looks like a straight-run cabinet but it extends into the corner along the side of an adjoining cabinet, structure, or appliance thus making its "buried" shelves accessible only from the front door (to allow better use of the "blind" corner cabinet, some manufacturers have cleverly created a cabinet with a first section which, on opening the door, pulls out and pivots to the side to expose roll-out trays which can then move forward to present their contents). Finally, there is a sink base corner cabinet that can be either an "L-shaped" cabinet to hold a butterfly sink or a diagonal-front cabinet with a regular straight-line sink -- a caveat whenever a corner sink cabinet is used: be sure that adequate standing area (for loading and unloading the dishwasher) is created by placing a 12-inch wide regular cabinet between the dishwasher and the corner cabinets side.
Purchasing Cabinets There are different tiers on purchasing cabinets too. You save money by assembling pre-cut parts from the manufacturer. Since cabinets will be the focal point of your kitchen, you may prefer to have assembled cabinets that are installed by the dealer. The following descriptions will help you make this decision. RTA or Ready-to-Assemble is provided by the cabinet manufacturer. If the manufacturer doesnt incur the labor expense to assemble the cabinet, he will pass this savings on to you. If you are going to use RTA cabinets to cut down on the expenses, you need to find your cabinets at the beginning of your project. You need time to assemble them and ready to install after installing the flooring, painting, papering are complete.
If your cabinets have whats called a four inch high toe kick feature, you may have the option of cutting this four inch height down to offset a small difference in the floor heights. Be careful as cutting too much can make the cabinets look squat. If the cabinets came with a detached set of toe kicks already framed, this makes leveling a great deal easier as well. Just lay out the base cabinet supports and check to see if they are level. Some shimming or minor cutting to provide perfectly sub-bases makes the base cabinet installation a snap. You need not worry whether each cabinet is level as the bases will automatically make it so.