Christa Howard Base Cabinets January 05th, 2018 - 10:37:28
Cost Each type of cabinet has a general budget that you can expect. Below are more details on each type and the expected price range for 10 x 10 standard cabinets. RTA cabinets are the least expensive. The frameless box and doors will be ¾ inch melamine and the drawers will have metal sides. Since you will be doing the installation, the cost of these is very low at approximately $70.00 per linear foot or $700.00 for your 10 x 10 standard. Stock cabinets have a major price increase with improved materials and they will be delivered and installed. The wood is generally ¾ inch hard board face frame and ½ inch particle board sides with hard board framed doors. Since you have a few more choices on finishes or stains, the price can range from $360 to $432 per linear foot or $3,600 to $4,320 for the standard measurements.
Why do you need a bathroom linen cabinet? It is not possible for all of us to construct huge bathrooms in our houses. It is in fact the smallest room of the house. Most of the space is consumed by a wash basin, bath tub, toilet commode, pipes and taps. In such situations bathroom linen cabinets help in holding bulky stuff such as bath towels, linens and wash clothes. Many people also use these cabinets to keep hair dryers, bathroom reading books, newspapers, lotions and creams. They are not just a decorative piece of every bathroom but also help in keeping the things set and managed well.
Frameless Cabinets will have the doors meeting the other door and will have drawers against other drawers. Looking at the front of the cabinet, you will see only the door or the drawer not the cabinet box itself. 10 x 10 Standard is just that a standard measure meaning 10 foot of base cabinets and 10 foot of wall cabinets. Manufacturers have used this calculation for their standard kitchen cabinets. You can still change this to meet your footage requirements but they will be a special order instead of than the standard measurements.
Stock, or store cabinets, are what you see if you go to a large home improvement store. Each store will typically have a very basic, unfinished cabinet line that is stocked in store and ready to purchase and take home that day. These are usually your cheapest option, but selections are very limited. Most of the time these will need to be finished either by you or by a contractor. Dont expect anything spectacular, these are usually cabinets in their most basic form. Drawer fronts are typically made from glued up strips of wood instead of one single piece of wood. Doors are usually paneled doors instead of raised wood panel doors. The carcasses of the cabinets will typically be cut from particle board, and if there is a back panel it is usually 1/8" hard-board. Countertop fastening brackets will be small, plastic corner brackets with a single screw hole for attaching to the counter.