Florence Rich Base Cabinets January 06th, 2018 - 14:35:44
Once the sub-bases for the lower cabinets are set, I recommend that you install the upper cabinets next as it is just plain easier. Once the wider base cabinets are installed it is harder to work on the narrower upper cabinets. Just measure up from the sub-base to get the top of the cabinets, add the counter thickness, add the space you want between the lower and upper cabinets (typically eighteen inches) and make a pencil mark. That is the bottom of your upper cabinets. Since your sub-base is level, just transfer the upper cabinet mark all along the run and you will have mark to set the bottom of each upper cabinet. Next locate all the wall studs and make a vertical mark using your level that will protrude both above and below the cabinets.
Since stock cabinets are mass produced they can be quite affordable. Another advantage is speed, in most cases dealers have access to larger warehouses where the cabinets are stored, and you can have your stock cabinet order within a few short weeks or in some cases days. Custom Kitchen Cabinets Custom kitchen cabinets are cabinets that are built just for your kitchen layout, design taste and needs. Custom kitchen cabinetry can easily be built to fit between two walls or to match odd angles, something not possible with stock kitchen cabinets. There are many advantages with custom cabinets that can not be had with stock cabinetry. The advantages that are at the top of the list are selection.
Cost Each type of cabinet has a general budget that you can expect. Below are more details on each type and the expected price range for 10 x 10 standard cabinets. RTA cabinets are the least expensive. The frameless box and doors will be ¾ inch melamine and the drawers will have metal sides. Since you will be doing the installation, the cost of these is very low at approximately $70.00 per linear foot or $700.00 for your 10 x 10 standard. Stock cabinets have a major price increase with improved materials and they will be delivered and installed. The wood is generally ¾ inch hard board face frame and ½ inch particle board sides with hard board framed doors. Since you have a few more choices on finishes or stains, the price can range from $360 to $432 per linear foot or $3,600 to $4,320 for the standard measurements.
Special Order Cabinets The upgrade from store cabinets would be ordering them from your local home improvement store or local lumberyard. Quality will be much noticeably higher than stock cabinets, but your options are still somewhat limited as to what you can order. Expect to see laminated interiors in either white or maple color, solid wood drawers and doors, and upgrades such as soft close hinges or soft close drawer slides. These cabinets will come finished and ready to install. Typically, these will be offered in all 3" increments, usually ranging from 12 inches wide to 36 or even 48 inches wide. Doors and drawer fronts may be somewhat customizable in terms of styles and colors, but options are still limited. Still expect 1/2" thick carcasses (the box part of the cabinets) and 1/8" to 1/4" thick cabinet backs.