Juliet Moody Base Cabinets January 17th, 2018 - 10:24:05
Stock, or store cabinets, are what you see if you go to a large home improvement store. Each store will typically have a very basic, unfinished cabinet line that is stocked in store and ready to purchase and take home that day. These are usually your cheapest option, but selections are very limited. Most of the time these will need to be finished either by you or by a contractor. Dont expect anything spectacular, these are usually cabinets in their most basic form. Drawer fronts are typically made from glued up strips of wood instead of one single piece of wood. Doors are usually paneled doors instead of raised wood panel doors. The carcasses of the cabinets will typically be cut from particle board, and if there is a back panel it is usually 1/8" hard-board. Countertop fastening brackets will be small, plastic corner brackets with a single screw hole for attaching to the counter.
If your cabinets have whats called a four inch high toe kick feature, you may have the option of cutting this four inch height down to offset a small difference in the floor heights. Be careful as cutting too much can make the cabinets look squat. If the cabinets came with a detached set of toe kicks already framed, this makes leveling a great deal easier as well. Just lay out the base cabinet supports and check to see if they are level. Some shimming or minor cutting to provide perfectly sub-bases makes the base cabinet installation a snap. You need not worry whether each cabinet is level as the bases will automatically make it so.
Cost Each type of cabinet has a general budget that you can expect. Below are more details on each type and the expected price range for 10 x 10 standard cabinets. RTA cabinets are the least expensive. The frameless box and doors will be ¾ inch melamine and the drawers will have metal sides. Since you will be doing the installation, the cost of these is very low at approximately $70.00 per linear foot or $700.00 for your 10 x 10 standard. Stock cabinets have a major price increase with improved materials and they will be delivered and installed. The wood is generally ¾ inch hard board face frame and ½ inch particle board sides with hard board framed doors. Since you have a few more choices on finishes or stains, the price can range from $360 to $432 per linear foot or $3,600 to $4,320 for the standard measurements.
A kitchen is the most essential part of any kind of house. It is the basic need for any house because kitchen is the main part of the house where cooking is done. One also has to maintain each and every part of the kitchen and keep it clean as it is the only place where we cook. The very first thing that someone sees in the kitchen is the kitchen cabinets. If you are planning for the renovation of your kitchen then you need to choose the right kind of cabinets regarding the environment of your kitchen. If you want to give a contemporary look to your kitchen then you can choose stylish cabinets.