Hannah Skinner Base Cabinets January 03rd, 2018 - 14:33:22
Wall corner cabinets include: (1) the diagonal-front -- this cabinet has a modified pentagon shape (this is the one most frequently chosen for this position); (2) the easy reach -- this cabinet appears to be two adjoining wall cabinets (it has a center hinge to allow opening the first door or both and allows direct access to the contents on the shelves); and the blind -- half of this cabinet is buried in the corner itself and can be accessed only by the front door of the cabinet -- this cabinet is the unfortunate choice in instances where structure or an appliance allows no other option. In conclusion then, when choosing cabinets in general and wall or base corner cabinets in particular, your best choices will depend on the size and shape of available space, your budget and the items that you plan to store there. Additionally, you really should make every effort to: (a) be as fully informed as possible about your cabinet options and (b) carefully review all of your decisions before ordering any cabinets -- whether or not you have bottomless pockets.
Frameless Cabinets will have the doors meeting the other door and will have drawers against other drawers. Looking at the front of the cabinet, you will see only the door or the drawer not the cabinet box itself. 10 x 10 Standard is just that a standard measure meaning 10 foot of base cabinets and 10 foot of wall cabinets. Manufacturers have used this calculation for their standard kitchen cabinets. You can still change this to meet your footage requirements but they will be a special order instead of than the standard measurements.
Semi-Custom Cabinets Semi custom cabinets are usually offered by specialty shops which deal a specific line of cabinets, but dont make them themselves. The customer will be able to choose the color, finish, style of doors and drawers, as well as many upgrades such as ball bearing slides and soft close hinges. The dealer will work with you and will also include any fillers or other pieces that might be needed to properly install the cabinets. Although you can often choose your own colors, etc, the dealer will have limited options because they can offer only what their supplier offers. A semi-custom cabinet dealer will usually be able to offer installation of the cabinets as well and combine it into one lump sum for you.
But what do you do when you are fitting cabinets between two walls? Well in this case the cabinet dealer can supply you with filler pieces to take up any large gaps that will eventually occur by using cabinets that are built within 2 inch increments. These cabinet filler pieces can be cut to fit the remaining gap relatively well. The main disadvantage with stock kitchen cabinets is the aforementioned incremental sizing but also the quality. Although as with anything the lower to mid range priced stock cabinets are typically made from thinner materials and have economy hardware such as cabinet door hinges and drawer slides. There are a few advantages with using stock cabinetry the very first one that comes to mind is cost.