Anastasia Burns Base Cabinets January 07th, 2018 - 12:15:24
If you are remodeling your kitchen (or building anew), you may need to choose a corner cabinet although not all kitchens need them.For example, a "galley" kitchen is called that because the walls (holding cabinets and appliances) that make up the kitchen face each other and, therefore, preclude the need for corner cabinets. Another possible arrangement in this vein would be an "L-shaped" kitchen with a straight-run of cabinets along one wall and another straight-run of cabinets on a wall that is perpendicular to it but separated from it by a doorway or floor-to-ceiling window. Cabinets installed in a straight run do not pose the variety of choices that corner cabinets do; therefore, if your new kitchen, bathroom, or office needs a corner cabinet, having a list of the types of corner cabinets currently available should help you make an educated choice in their shape and size.
This way you will not be searching for a stud while standing on a ladder and balancing a cabinet. It is a few minutes work well spent. Next remove all cabinet doors marking each one is marked as to which cabinets they belong too. If you are working alone, take a piece of one by two inch furring and screw it to the wall flush with the bottom of the upper cabinet mark. You will be able to rest the cabinet on the furring while you plumb the cabinet and fasten it to the wall. Starting with the first cabinet, go ahead and screw the cabinet securely to the studs using three inch drywall screws. You can countersink them or course or use screw washers depending on what you want the final appearance to be.
Once the sub-bases for the lower cabinets are set, I recommend that you install the upper cabinets next as it is just plain easier. Once the wider base cabinets are installed it is harder to work on the narrower upper cabinets. Just measure up from the sub-base to get the top of the cabinets, add the counter thickness, add the space you want between the lower and upper cabinets (typically eighteen inches) and make a pencil mark. That is the bottom of your upper cabinets. Since your sub-base is level, just transfer the upper cabinet mark all along the run and you will have mark to set the bottom of each upper cabinet. Next locate all the wall studs and make a vertical mark using your level that will protrude both above and below the cabinets.
Stock cabinets are already manufactured as for samples for the customers in standard sizes so that they get an idea about what designs are available and how the stock cabinets look. If we speak about the thickness of the stock cabinets, they are nine inches wide. Height of these cabinets is about thirty to thirty-three inches. These cabinets are built as samples for the customers to have an idea about the stock variety available at the shop. For the manufacturing of these cabinets, plywood and melamine is used. Each part of the cabinet is made accurately and efficiently and when all the pieces are built then they are finally joined together to form a full fledge cabinet. Custom Cabinets Now comes the turn of the custom kitchen cabinets. These cabinets are made according to the customers specifications and requirements.