Katrina Cummings Base Cabinets January 05th, 2018 - 10:37:18
Place two C clamps in the first cabinet, lift the second cabinet into place and using the C clamps, firmly clamp the front face stile of the first cabinet to the second. The combination of the wall furring strip and the two clamps will allow you to let go and do the work of affixing the second cabinet to the wall and to each other. Making sure that the front faces are perfectly flush with each other and the heights are perfectly matched, standard practice is to pre-drill a screw hole behind the door hinge. Using drywall screws again, insert a screw in the hole making sure the screw will not penetrate through the stile of the other cabinet (too long). Place one screw behind each hinge. Now fasten the second cabinet to the wall and then release the clamps. This same scenario repeats itself until you reach the end of the cabinets. You may have spaces where a window occurs but your furring strip will assure that both sections are mounted at the same height.
Find a room in your house or the basement to assemble them. Make sure that once these cabinets are assembled that you can still get them through the door and back into the kitchen. When they are assembled, they are going to be big, bulky items to move around. Youre going to need several people to move them too. Stock Cabinets or Factory-Assembled RTA has been fully assembled by the factory and are shipped to the dealer. These are a quick assembly process. If you dont have time or talent for assembling things, or dont have an assembly area, this may be best. The dealer will provide a crew or arrange for their installation.
Stock cabinets are already manufactured as for samples for the customers in standard sizes so that they get an idea about what designs are available and how the stock cabinets look. If we speak about the thickness of the stock cabinets, they are nine inches wide. Height of these cabinets is about thirty to thirty-three inches. These cabinets are built as samples for the customers to have an idea about the stock variety available at the shop. For the manufacturing of these cabinets, plywood and melamine is used. Each part of the cabinet is made accurately and efficiently and when all the pieces are built then they are finally joined together to form a full fledge cabinet. Custom Cabinets Now comes the turn of the custom kitchen cabinets. These cabinets are made according to the customers specifications and requirements.
Semi-Custom Cabinets Semi custom cabinets are usually offered by specialty shops which deal a specific line of cabinets, but dont make them themselves. The customer will be able to choose the color, finish, style of doors and drawers, as well as many upgrades such as ball bearing slides and soft close hinges. The dealer will work with you and will also include any fillers or other pieces that might be needed to properly install the cabinets. Although you can often choose your own colors, etc, the dealer will have limited options because they can offer only what their supplier offers. A semi-custom cabinet dealer will usually be able to offer installation of the cabinets as well and combine it into one lump sum for you.