Charlene Spencer Base Cabinets January 07th, 2018 - 12:14:47
Whenever you need to make a major purchase if you are budget-conscious -- by choice or by necessity, the best (I would say, only) place to start is by accumulating as much information as you can about the available possibilities. When buying cabinets, an extremely important consideration is to be sure that the measurements you are working with of the involved area(s) are accurate. You certainly do not want to learn too late that your cabinet choices and/or the resulting layout of them might have better met your needs.
These cabinets are a one-size-fits-all solution to your kitchen storage needs. If you have an irregular room or need modifications, these cabinets may not be the best choice for you. Typically, stock cabinets are made from lower quality materials and will not last as long as custom cabinetry. Semi-Custom Cabinets: These cabinets are a good compromise between custom and stock cabinetry. Semi-custom cabinets are stock cabinets that a consumer can modify to meet his or her individual needs. There are a variety of size and style options available that let the homeowner create a kitchen layout that caters to his or her tastes and lifestyle. With so many options and modifications available, the consumer can create the kitchen of his dreams that is unique and personalized for his family.
Semi-Custom Cabinets Semi custom cabinets are usually offered by specialty shops which deal a specific line of cabinets, but dont make them themselves. The customer will be able to choose the color, finish, style of doors and drawers, as well as many upgrades such as ball bearing slides and soft close hinges. The dealer will work with you and will also include any fillers or other pieces that might be needed to properly install the cabinets. Although you can often choose your own colors, etc, the dealer will have limited options because they can offer only what their supplier offers. A semi-custom cabinet dealer will usually be able to offer installation of the cabinets as well and combine it into one lump sum for you.
But what do you do when you are fitting cabinets between two walls? Well in this case the cabinet dealer can supply you with filler pieces to take up any large gaps that will eventually occur by using cabinets that are built within 2 inch increments. These cabinet filler pieces can be cut to fit the remaining gap relatively well. The main disadvantage with stock kitchen cabinets is the aforementioned incremental sizing but also the quality. Although as with anything the lower to mid range priced stock cabinets are typically made from thinner materials and have economy hardware such as cabinet door hinges and drawer slides. There are a few advantages with using stock cabinetry the very first one that comes to mind is cost.