Grace Holcomb Base Cabinets January 14th, 2018 - 11:19:43
Beginning with base corner cabinets, we have: (1) the symmetrical easy reach -- this cabinet is the same length on each side of the corner and contains either shelves along its rear walls or a carousel with shelves "pie-cut" to accommodate the doors (a center hinge allows opening either the first door or both); (2) the asymmetircal easy reach -- this cabinet is a little shorter on one leg (if it includes a carousel, that diameter will be the length of the cabinets shorter leg); (3) the revolving -- this cabinet is like cabinet #1 but its doors revolve with the carousel shelves; (4) the diagonal-front -- this cabinet allows a full-circle carousel; and (5) the blind -- this cabinet looks like a straight-run cabinet but it extends into the corner along the side of an adjoining cabinet, structure, or appliance thus making its "buried" shelves accessible only from the front door (to allow better use of the "blind" corner cabinet, some manufacturers have cleverly created a cabinet with a first section which, on opening the door, pulls out and pivots to the side to expose roll-out trays which can then move forward to present their contents). Finally, there is a sink base corner cabinet that can be either an "L-shaped" cabinet to hold a butterfly sink or a diagonal-front cabinet with a regular straight-line sink -- a caveat whenever a corner sink cabinet is used: be sure that adequate standing area (for loading and unloading the dishwasher) is created by placing a 12-inch wide regular cabinet between the dishwasher and the corner cabinets side.
Semi-custom cabinets are usually ½ inch plywood with ¾ inch hardwood face frame and are delivered and installed. The drawers are dovetailed of ½ inch hardwood and doors are frame and panel hardwood. Prices range from $450 to $540 per linear foot or $4,500 to $5,400 for the 10 x 10 standard. Custom cabinets offer the same ½ inch plywood with ¾ inch hardwood face frame and are delivered and installed. The drawers are dovetailed of 5/8 inch hardwood and doors are frame and panel hardwood. Prices range from $1.200 to $1,400 per linear foot or $12,000 to $14,000 for standard measurements. Armed with these definitions and what they will mean to your kitchen remodel budget, you are now ready to look for your new cabinets.
Since stock cabinets are mass produced they can be quite affordable. Another advantage is speed, in most cases dealers have access to larger warehouses where the cabinets are stored, and you can have your stock cabinet order within a few short weeks or in some cases days. Custom Kitchen Cabinets Custom kitchen cabinets are cabinets that are built just for your kitchen layout, design taste and needs. Custom kitchen cabinetry can easily be built to fit between two walls or to match odd angles, something not possible with stock kitchen cabinets. There are many advantages with custom cabinets that can not be had with stock cabinetry. The advantages that are at the top of the list are selection.
These cabinets are a one-size-fits-all solution to your kitchen storage needs. If you have an irregular room or need modifications, these cabinets may not be the best choice for you. Typically, stock cabinets are made from lower quality materials and will not last as long as custom cabinetry. Semi-Custom Cabinets: These cabinets are a good compromise between custom and stock cabinetry. Semi-custom cabinets are stock cabinets that a consumer can modify to meet his or her individual needs. There are a variety of size and style options available that let the homeowner create a kitchen layout that caters to his or her tastes and lifestyle. With so many options and modifications available, the consumer can create the kitchen of his dreams that is unique and personalized for his family.