Marla Woods Base Cabinets January 07th, 2018 - 12:14:09
Because custom cabinets are made from scratch, you will need to allow plenty of time for them to be created and installed. Homeowners who want their cabinets replaced quickly should make a different choice. Also, these cabinets are generally more expensive than other options. The high quality and customization of this cabinetry can make them much more expensive than other stock or semi-custom cabinets. Stock Cabinets: The biggest advantage of stock cabinets is that they are readily available for installation. Many home improvement stores and big box retailers sell stock cabinets that can be picked up or delivered within a week or two. Manufacturers of these cabinets offer a variety of styles and colors that will match your home décor and compliment your style. Homeowners like these cabinets because they are very affordable and easy to find.
On the other hand if your kitchen is country style then you might want to use traditional style cabinets. Apart from this, choosing between the custom cabinets and stock cabinets is the most difficult thing to do as it involves a lot of mind trouble. This choice can be made by keeping in mind your budget, the kitchen environment and your taste. While making the decision you should keep all the flaws and advantages in mind so that you wont end up making the wrong choice. Stock Cabinets Some people think that stock cabinets are the cabinets that can be taken away from the retailer quite easily but this is not the fact. Even though the cabinets that you can see on the store shelves are selected by you but you have to first place the order at the shop management and then wait for your required design of cabinets to be ready.
Semi-custom cabinets are usually ½ inch plywood with ¾ inch hardwood face frame and are delivered and installed. The drawers are dovetailed of ½ inch hardwood and doors are frame and panel hardwood. Prices range from $450 to $540 per linear foot or $4,500 to $5,400 for the 10 x 10 standard. Custom cabinets offer the same ½ inch plywood with ¾ inch hardwood face frame and are delivered and installed. The drawers are dovetailed of 5/8 inch hardwood and doors are frame and panel hardwood. Prices range from $1.200 to $1,400 per linear foot or $12,000 to $14,000 for standard measurements. Armed with these definitions and what they will mean to your kitchen remodel budget, you are now ready to look for your new cabinets.
Once the sub-bases for the lower cabinets are set, I recommend that you install the upper cabinets next as it is just plain easier. Once the wider base cabinets are installed it is harder to work on the narrower upper cabinets. Just measure up from the sub-base to get the top of the cabinets, add the counter thickness, add the space you want between the lower and upper cabinets (typically eighteen inches) and make a pencil mark. That is the bottom of your upper cabinets. Since your sub-base is level, just transfer the upper cabinet mark all along the run and you will have mark to set the bottom of each upper cabinet. Next locate all the wall studs and make a vertical mark using your level that will protrude both above and below the cabinets.