Leonor Jordan Base Cabinets January 17th, 2018 - 10:24:57
In straight-run base-cabinets, one consideration that should be a priority is, if at all possible, to include "roll-outs" (variably called roll-out shelves, trays, etc.) factory-installed inside them; this is because "roll-outs" provide much better accessibility to items stored there (but, if your budget will only allow one roll-out per cabinet, be sure to place it on the cabinets bottom level). But, in case you happen to not be replacing perfectly fine base cabinets which do not have "roll-outs", all is not lost; that advantage can be added later via "inserts". And, if you are then unable to find "inserts" from a manufacturer, they can be self-built and installed.
Because of the modifications available, these cabinets are not constructed until the order has been placed. As a result, it may take longer to receive these than stock cabinets, but not as long as custom cabinets. The cost of semi-custom cabinets depends greatly on the options you desire. The consumer has a lot of control in determining the style and layout of these cabinets. When choosing cabinets, you want to make sure that you are getting a high quality product at a fair price. Shop around until you find a cabinet retailer that is knowledgeable and experienced.
Typically, stocked cabinets are offered in extremely limited sizes, and while most cabinets are offered in 3" increments, some stock cabinets may only be available in 6" increments. This is important when it comes to the overall layout of your kitchen remodel, because stock cabinets are mass-produced to the same size and specifications with no regards as to where they go. You will usually need fillers and end panels to create a finished look when using stock cabinets. The end of each cabinet that is exposed, on both the upper and the base cabinets, will need to be finished to match the front of the cabinets. This will include cutting and fitting finished panels onto the cabinet carcass itself. Keep in mind that if you are running your cabinets wall to wall, then finishing the ends is not important since the wall will hide the ends.
Semi-Custom Cabinets Semi custom cabinets are usually offered by specialty shops which deal a specific line of cabinets, but dont make them themselves. The customer will be able to choose the color, finish, style of doors and drawers, as well as many upgrades such as ball bearing slides and soft close hinges. The dealer will work with you and will also include any fillers or other pieces that might be needed to properly install the cabinets. Although you can often choose your own colors, etc, the dealer will have limited options because they can offer only what their supplier offers. A semi-custom cabinet dealer will usually be able to offer installation of the cabinets as well and combine it into one lump sum for you.