Lelia Lambert Base Cabinets January 12th, 2018 - 10:54:07
Wall corner cabinets include: (1) the diagonal-front -- this cabinet has a modified pentagon shape (this is the one most frequently chosen for this position); (2) the easy reach -- this cabinet appears to be two adjoining wall cabinets (it has a center hinge to allow opening the first door or both and allows direct access to the contents on the shelves); and the blind -- half of this cabinet is buried in the corner itself and can be accessed only by the front door of the cabinet -- this cabinet is the unfortunate choice in instances where structure or an appliance allows no other option. In conclusion then, when choosing cabinets in general and wall or base corner cabinets in particular, your best choices will depend on the size and shape of available space, your budget and the items that you plan to store there. Additionally, you really should make every effort to: (a) be as fully informed as possible about your cabinet options and (b) carefully review all of your decisions before ordering any cabinets -- whether or not you have bottomless pockets.
Semi-custom cabinets are usually ½ inch plywood with ¾ inch hardwood face frame and are delivered and installed. The drawers are dovetailed of ½ inch hardwood and doors are frame and panel hardwood. Prices range from $450 to $540 per linear foot or $4,500 to $5,400 for the 10 x 10 standard. Custom cabinets offer the same ½ inch plywood with ¾ inch hardwood face frame and are delivered and installed. The drawers are dovetailed of 5/8 inch hardwood and doors are frame and panel hardwood. Prices range from $1.200 to $1,400 per linear foot or $12,000 to $14,000 for standard measurements. Armed with these definitions and what they will mean to your kitchen remodel budget, you are now ready to look for your new cabinets.
With the upper cabinets mounted go ahead and install the base cabinets in the exact same way. Each cabinet screwed side to side and then to the wall. Once all cabinets have been installed, go ahead and install your counter tops. Back splash work, electrical connections for micro waves or exhaust hoods and their actual installations should all be done before the doors are re-installed. You want to handle the doors gently as they are the major amount of what people actually see. Level the doors, install the drawer and door pulls and your done. Almost all municipalities require a building permit for this type of work as in a kitchen it involves plumbing, electrical, perhaps heating and possible structural changes as well. A garage set of work storage cabinets may not involve any of these items but be safe and ask first.
For cabinet backs you will typically see 1/2" thick material, with thicker areas specifically manufactured for mounting screws. The tops will always incorporate a countertop fastening strip at the front and rear of base cabinets, which you wont see in stock cabinets. As far as design and aesthetics go, the only limitations are your imagination and budget. Almost anything is possible because your cabinets will be made specifically just for you. You have complete access to options such as pull-out slides, trash organizers, limitless hardware choices, pantry organizers, and much more. The cabinetmaker will often install these cabinets themselves too, saving you the headache of doing it yourself. While obviously more expensive, you can design and get exactly what you want, instead of settling for what you can find.