Florence Rich Base Cabinets January 09th, 2018 - 10:09:54
Stock cabinets are already manufactured as for samples for the customers in standard sizes so that they get an idea about what designs are available and how the stock cabinets look. If we speak about the thickness of the stock cabinets, they are nine inches wide. Height of these cabinets is about thirty to thirty-three inches. These cabinets are built as samples for the customers to have an idea about the stock variety available at the shop. For the manufacturing of these cabinets, plywood and melamine is used. Each part of the cabinet is made accurately and efficiently and when all the pieces are built then they are finally joined together to form a full fledge cabinet. Custom Cabinets Now comes the turn of the custom kitchen cabinets. These cabinets are made according to the customers specifications and requirements.
Place two C clamps in the first cabinet, lift the second cabinet into place and using the C clamps, firmly clamp the front face stile of the first cabinet to the second. The combination of the wall furring strip and the two clamps will allow you to let go and do the work of affixing the second cabinet to the wall and to each other. Making sure that the front faces are perfectly flush with each other and the heights are perfectly matched, standard practice is to pre-drill a screw hole behind the door hinge. Using drywall screws again, insert a screw in the hole making sure the screw will not penetrate through the stile of the other cabinet (too long). Place one screw behind each hinge. Now fasten the second cabinet to the wall and then release the clamps. This same scenario repeats itself until you reach the end of the cabinets. You may have spaces where a window occurs but your furring strip will assure that both sections are mounted at the same height.
Purchasing Cabinets There are different tiers on purchasing cabinets too. You save money by assembling pre-cut parts from the manufacturer. Since cabinets will be the focal point of your kitchen, you may prefer to have assembled cabinets that are installed by the dealer. The following descriptions will help you make this decision. RTA or Ready-to-Assemble is provided by the cabinet manufacturer. If the manufacturer doesnt incur the labor expense to assemble the cabinet, he will pass this savings on to you. If you are going to use RTA cabinets to cut down on the expenses, you need to find your cabinets at the beginning of your project. You need time to assemble them and ready to install after installing the flooring, painting, papering are complete.
Custom Cabinet Cost Most people want to know how much more custom cabinetry will cost as compared to stock cabinets. This is almost impossible to answer with any degree of accuracy. The real truth of the matter is that custom cabinets are going to cost more that the lower lines of comparable stock cabinetry. But we have seen custom cabinets be very competitive with the mid to higher range stock cabinets. Despite the higher prices of custom kitchen cabinets it is almost always worth the extra cost. The cabinets are built in a much more solid fashion as well as most custom cabinetmakers will use a ¾ inch thick cabinet case material, it doesnt get much more solid than that. All cabinet shops will have varying prices, so we do recommend you always compare the same exact kitchen design from shop to shop for the most accurate estimations.