Margie Hale Base Cabinets January 13th, 2018 - 18:32:47
Whenever you need to make a major purchase if you are budget-conscious -- by choice or by necessity, the best (I would say, only) place to start is by accumulating as much information as you can about the available possibilities. When buying cabinets, an extremely important consideration is to be sure that the measurements you are working with of the involved area(s) are accurate. You certainly do not want to learn too late that your cabinet choices and/or the resulting layout of them might have better met your needs.
Stock, or store cabinets, are what you see if you go to a large home improvement store. Each store will typically have a very basic, unfinished cabinet line that is stocked in store and ready to purchase and take home that day. These are usually your cheapest option, but selections are very limited. Most of the time these will need to be finished either by you or by a contractor. Dont expect anything spectacular, these are usually cabinets in their most basic form. Drawer fronts are typically made from glued up strips of wood instead of one single piece of wood. Doors are usually paneled doors instead of raised wood panel doors. The carcasses of the cabinets will typically be cut from particle board, and if there is a back panel it is usually 1/8" hard-board. Countertop fastening brackets will be small, plastic corner brackets with a single screw hole for attaching to the counter.
But what do you do when you are fitting cabinets between two walls? Well in this case the cabinet dealer can supply you with filler pieces to take up any large gaps that will eventually occur by using cabinets that are built within 2 inch increments. These cabinet filler pieces can be cut to fit the remaining gap relatively well. The main disadvantage with stock kitchen cabinets is the aforementioned incremental sizing but also the quality. Although as with anything the lower to mid range priced stock cabinets are typically made from thinner materials and have economy hardware such as cabinet door hinges and drawer slides. There are a few advantages with using stock cabinetry the very first one that comes to mind is cost.
Since stock cabinets are mass produced they can be quite affordable. Another advantage is speed, in most cases dealers have access to larger warehouses where the cabinets are stored, and you can have your stock cabinet order within a few short weeks or in some cases days. Custom Kitchen Cabinets Custom kitchen cabinets are cabinets that are built just for your kitchen layout, design taste and needs. Custom kitchen cabinetry can easily be built to fit between two walls or to match odd angles, something not possible with stock kitchen cabinets. There are many advantages with custom cabinets that can not be had with stock cabinetry. The advantages that are at the top of the list are selection.