Robbie Greene Base Cabinets January 07th, 2018 - 12:14:53
Purchasing Cabinets There are different tiers on purchasing cabinets too. You save money by assembling pre-cut parts from the manufacturer. Since cabinets will be the focal point of your kitchen, you may prefer to have assembled cabinets that are installed by the dealer. The following descriptions will help you make this decision. RTA or Ready-to-Assemble is provided by the cabinet manufacturer. If the manufacturer doesnt incur the labor expense to assemble the cabinet, he will pass this savings on to you. If you are going to use RTA cabinets to cut down on the expenses, you need to find your cabinets at the beginning of your project. You need time to assemble them and ready to install after installing the flooring, painting, papering are complete.
Installing cabinets whether in a kitchen, laundry or utility cabinets in a garage, they all have the same basic set of installation requirements. Some simple tools are required and are in most handymans tool pails. Pencils, good carpenters four foot level, tape measure, screw gun, several Quick type C clamps and a chalk line is a great start. If you have the use of a tripod with a builders level (or can rent one for a day) this will speed the work along greatly. Starting at either end of the cabinet set, make a pencil mark four feet above the floor. Now using the four foot level, transfer that mark along the wall to the other end of the cabinet run and make another pencil mark. Measure down to the floor to see if it is four feet above the floor. If it is exactly four feet, then your floor is level. If it is more than four feet then you know the floor slopes down towards that end. If you start the cabinets at that low end you will not be able to keep the cabinets level before you run "into " the floor. If you start at the four foot end that you started with, you will be able to shim the cabinets up so they all remain the same level height above the floor.
Special Order Cabinets The upgrade from store cabinets would be ordering them from your local home improvement store or local lumberyard. Quality will be much noticeably higher than stock cabinets, but your options are still somewhat limited as to what you can order. Expect to see laminated interiors in either white or maple color, solid wood drawers and doors, and upgrades such as soft close hinges or soft close drawer slides. These cabinets will come finished and ready to install. Typically, these will be offered in all 3" increments, usually ranging from 12 inches wide to 36 or even 48 inches wide. Doors and drawer fronts may be somewhat customizable in terms of styles and colors, but options are still limited. Still expect 1/2" thick carcasses (the box part of the cabinets) and 1/8" to 1/4" thick cabinet backs.
Semi-custom cabinets are usually ½ inch plywood with ¾ inch hardwood face frame and are delivered and installed. The drawers are dovetailed of ½ inch hardwood and doors are frame and panel hardwood. Prices range from $450 to $540 per linear foot or $4,500 to $5,400 for the 10 x 10 standard. Custom cabinets offer the same ½ inch plywood with ¾ inch hardwood face frame and are delivered and installed. The drawers are dovetailed of 5/8 inch hardwood and doors are frame and panel hardwood. Prices range from $1.200 to $1,400 per linear foot or $12,000 to $14,000 for standard measurements. Armed with these definitions and what they will mean to your kitchen remodel budget, you are now ready to look for your new cabinets.