Lelia Lambert Base Cabinets January 05th, 2018 - 10:36:59
With the upper cabinets mounted go ahead and install the base cabinets in the exact same way. Each cabinet screwed side to side and then to the wall. Once all cabinets have been installed, go ahead and install your counter tops. Back splash work, electrical connections for micro waves or exhaust hoods and their actual installations should all be done before the doors are re-installed. You want to handle the doors gently as they are the major amount of what people actually see. Level the doors, install the drawer and door pulls and your done. Almost all municipalities require a building permit for this type of work as in a kitchen it involves plumbing, electrical, perhaps heating and possible structural changes as well. A garage set of work storage cabinets may not involve any of these items but be safe and ask first.
Frameless Cabinets will have the doors meeting the other door and will have drawers against other drawers. Looking at the front of the cabinet, you will see only the door or the drawer not the cabinet box itself. 10 x 10 Standard is just that a standard measure meaning 10 foot of base cabinets and 10 foot of wall cabinets. Manufacturers have used this calculation for their standard kitchen cabinets. You can still change this to meet your footage requirements but they will be a special order instead of than the standard measurements.
In planning your kitchen remodeling, the kitchen cabinets will give immediate eye appeal, provide functionality but can also be the biggest cost. Regardless of what your remodel budget is, the cabinet could easily be one half of that expense. As we wander through the cabinet section of the store, it does seem these are just big boxes with doors. Nevertheless we are amazed at the cost. Making cabinets does require skill to have tightly fitted corners and joins. If one part is off, some other part wont fit properly. The type of wood used and the finish on the wood all have a price tag. Nevertheless, you need to get the best cabinets possible for your budget. Here are some ideas on what you can find.
Once the sub-bases for the lower cabinets are set, I recommend that you install the upper cabinets next as it is just plain easier. Once the wider base cabinets are installed it is harder to work on the narrower upper cabinets. Just measure up from the sub-base to get the top of the cabinets, add the counter thickness, add the space you want between the lower and upper cabinets (typically eighteen inches) and make a pencil mark. That is the bottom of your upper cabinets. Since your sub-base is level, just transfer the upper cabinet mark all along the run and you will have mark to set the bottom of each upper cabinet. Next locate all the wall studs and make a vertical mark using your level that will protrude both above and below the cabinets.